METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION APPLICATIONS1-800-221-0932metraonline.comINSTALLATION INSTRUCTIONS
METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932metraonline.comINSTALLATION INSTRUCTIONS FOR PART 99
METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION APLICACIONES1-800-221-0932metraonline.comINSTRUCCIONES DE INSTALAC
IndiceDesmontaje del tablero– Toyota Sequoia (cambio de consola) 2008 y más recientes ...3-4– Toyota Sequoia (c
1. Desenganche y quite el panel de moldura de arriba que rodea los portavasos. (Figura A)2. Quite (1) tornillo Phillips del panel de la moldura de
4Desmontaje del tablero 99-8220Toyota Tundra 2007 y mas (cambio de consola) Toyota Sequoia 2008 y mas (cambio de consola)4. Quite los (4) pernos de
1. Quite los (2) tornillos Phillips de plástico, uno a cada lado del panel de la moldura debajo del portavasos, luego desenganche y quite el panel.
6Ensamble del kit 99-82201. Deslice la reja DIN en la carcasa del radio y sujétela doblando hacia afuera las pestañas de metal. (Figura A)2. Deslic
Ensamble del kit 99-82207Provisión de radio de montajeISO con bolsillo1. Monte los soportes ISO en el radio con los tornillos que vienen con el radio
Table of ContentsDash Disassembly– Toyota Sequoia (console shift) 2008-up... 3-4–
8Ensamble del kit 99-82201. Corte y quite la barra central de la carcasa del radio. (Figura A)2. Coloque a presión los soportes Doble DIN en el bor
Ensamble del kit 99-82209Provisión de unidad de montajeISO vertical1. Corte y quite la barra central de la carcasa del radio. (Figura A)2. Coloque
Notas
Notas
METRA. THE WORLD’S BEST KITS.™© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932metraonline.comINSTRUCCIONES DE INSTALACIÓN PARA LA
1. Unclip and remove the top trim panel around cup holders. (Figure A)2. Remove (1) Phillips screw from shifter trim panel and remove panel. (Figu
4Dash Disassembly 99-8220Toyota Tundra 2007-up (console shift)Toyota Sequoia 2008-up (console shift)4. Remove (4) 10 mm bolts securing the radio. (
1. Remove (2) plastic Phillips screws one from each side of the trim panel below the cup holder then unclip and remove the panel. (Figure A)2. Pu
6Kit Assembly 99-82201. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure A)2. Slide the afte
Kit Assembly 99-82207ISO mount radio provision with pocket1. Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure A
8Kit Assembly 99-82201. Cut and remove the center bar from the radio housing. (Figure A)2. Snap the Double DIN brackets to the inside edge of the r
Kit Assembly 99-82209Stacked ISO mount units provision1. Cut and remove the center bar from the radio housing. (Figure A)2. Snap the Double DIN bra
Comments to this Manuals